C61F-GP Ниво Сигнализатор Ключ Контролер-Пълнене Maximize

C61F-GP Level Indicator Switch Controller-FILLING

Level Indicator works on the principle of conductivity measurement. Therefore, it mainly finds application for control of the level of conductive liquids. For this purpose conductive probes are required, which are separately specified. There are no obstacles to floating probe probes to the level of the alarm. This extends its application to both conductive and non-conductive liquids.

More details

C61F-GP

5 Items in stock

36,00 лв

Product Description:
The logic is simple. The "water supply" function is realized as follows: The relay (NO) is included whenever the Electrode 1 / E1 is not wetted. So stuffing starts. Once the Electrode 1 / E1 / is wet, the relay switches off. Plugging the relay to replenish is only required if Electrod 2 / E2 / is dry. The required hysteresis of the relay for controlling the actuators, pumps or solenoid valves is realized.
The logic of the drainage function is analogous. It is achieved with the same relay, but with its NC contact.
Here is the time to recommend to our customers that this level controller is mainly used for "filling" via NO relay contact. NC contacts, in principle, should not be included in the operating circuits according to the basic principle of automation. In other words, if a drain function is required, we recommend the 61F-GP-N8 that we posted on the site.
 
Features:
Supply voltage: AC 220V, offset 85 ... 110%;
Supply frequency: 50 / 60Hz;
Consumption: 3.2VA
Voltage to the electrodes supplied by the instrument: AC 8V;
Relay switching: 5A 250VAC (active load);
Relay on, input: < 4 kOhm;
Relay of, input: > 15 kOhm;
Response time on / off:  80/160 ms;
Cable length (0.75mm2) to the probe: max 1 km;
Insulation: 100MOhm (500VDC);
Dielectric strength: 1500VAC / 1min;
Indications: LED - 2 units for both modes of operation;
Ambient temperature: -10 to 50 ° C;
Ambient humidity: 45 ... 85%;
Color: Gray / as in the picture;
Material (external): plastic;
Size: 5.7 x 4.9 x 4 cm;
Weight: about 0.2kg
Connection: with 8 pin connector for DIN rail mounting (included in the price).

Write your review

C61F-GP  Level Indicator Switch Controller-FILLING

C61F-GP Level Indicator Switch Controller-FILLING

Level Indicator works on the principle of conductivity measurement. Therefore, it mainly finds application for control of the level of conductive liquids. For this purpose conductive probes are required, which are separately specified. There are no obstacles to floating probe probes to the level of the alarm. This extends its application to both conductive and non-conductive liquids.

Write your review