FT100 48x48mm, RS485 Modbus RTU, indicator with analog inputs universal

Communication: RS-485 Modbus RTU
Dual 4 digit display, 7 segment
Third-bargraph display
Accuracy: 0.2% ... 0.5% of range
Alarm outputs: with or without delay
Alarm functions: 12
Maximum number of relays: 3 pcs.

More details

FT100-602-2-96-N-K-A

5 Items in stock

172,80 лв

Specification:
Inputs:
Analog inputs:
         2-10VDC, 4-20mA with an external resistor 500ohms, 250mW         
         0-10VDC, 0-20mA with an external resistor 500ohms, 250mW         
Value: °C/°F/A - selectable
Decimal point: 1/ 0.1/ 0.01/ 0.001 - selectable
Resolution: 0.001 for analog input
switching:
Output 1: SPST - 5A @ 250VAC resistive load
Output 2: SPST - 3A @ 250VAC resistive load
Alarm 1: SPST - 3A @ 250VAC resistive load
OPTIONAL:
Transmitting output - proportional to the input value:
Current: 4-20 mA (impedance - 500 ohm)
Voltage: 0-10VDC (load - 10 Kohm min)
Transmitting output - proportional to the set value:
Voltage: 0-    5DC  (load - 10 Kohm min)
Power supply: 85-265VAC
Consumption: max 6VA @ 230VAC
Environment:
Temperature operation: 0 ... 50 ° C
Storage temperature: -20 ... 75 ° C
Humidity max: 95% RH, non-condensing
Weight: 0.170 kg / FT100; 0.250 kg / FT400-500-700; 0.350 kg / FT900
Dust: only the front panel
Functional specifications:
SP1 / SP2 / SP3 – Set Point of outputs: adjustable
HYS SP1 / 2, HYS AL1  - hysteresis, adjustable 0.0-100.0
SPT1 / 2, SPALT1 2 - delays outputs: adjustable
Input offset: -199 ... 199
Alarm functions: deviation relative high/low , absolute high / low, band alarm
SP low limit: -1999 ... 1999
SP high limit: -1999 ... 1999
Optional power sensor / additional power /:
24VDC insulated / uninsulated
12VDC insulated / uninsulated
9VDC insulated / uninsulated
5VDC insulated / uninsulated
DEFINITION OF THE APPLIANCES OPERATED WITH OPTION: 24VDC isolated power supply
Available serial communication
Interface standard: RS-485
Communication adress: 0 to 127, maximum 36 units per line
Transmission mode: Half dupleex
Transmission protocol: Modbus RTU
Transmission format: Support 03 read command, 06 and 10 write command
1 start bit+8 digit bit+N+1 stop bit(8.N.1)
1 start bit+8 digit bit+N+2 stop bit(8.N.2)
Transmission speed: 2400, 4800, 9600, 19200(9600 default)
Compliance:
IEC / EN61326 (EMI / EMC)
IEC / EN 61010Revision 3 2010Edition (Safety)
  • Rated voltage: 85-265VAC
  • Controllers control law: Positional (on-off)
  • Panel size, WxH mm: 48x48 mm

Write your review

FT100 48x48mm, RS485 Modbus RTU, indicator with analog inputs universal

FT100 48x48mm, RS485 Modbus RTU, indicator with analog inputs universal

Communication: RS-485 Modbus RTU
Dual 4 digit display, 7 segment
Third-bargraph display
Accuracy: 0.2% ... 0.5% of range
Alarm outputs: with or without delay
Alarm functions: 12
Maximum number of relays: 3 pcs.

Write your review