GRL8-02 level controller 10A, AC / DC24V-240V DIN rail for conductive liquids

Application: Level monitoring in wells, pools, tanks, Advantages: control on 1 or 2 levels, FILLING or DRAINING functions, input sensitivity adjustment (5 ... 100KOhm), output response (adjustable 0.1 - 10s ), galvanically divided power supply: 24-240VAC / DC, output: 1SPDT 10A / AC1, relay status indication, DIN rail mounting.

More details

GRL8-02

5 Items in stock

82,80 лв

The controller works with the so-called conductive (resistance) probes, which are specific to each object and are ordered separately.
Technical parameters: GRL8-02
Function: 2 or 1 level contorl mode
Supply terminals: A1-A2
Voltage range: AC/DC 24-240V(50-60Hz)
Input: max.2VA
Supply voltage tolerance: -15%;+10%
Sensitivity ( input resistance): adjustable in range 5 kΩ -100 kΩ
Voltage in electrodes: max. AC 5 V
Current in probe: AC <0.1 mA
Time response: max. 400 ms
Max. capacity length: 800 m (sensitivity 25kΩ), 200 m (sensitivity 100 kΩ)
Max. capacity of probe cable: 400 nF (sensitivity 25kΩ), 100 nF (sensitivity 100 kΩ)
Time delay (t): adjustable, 0.1 -10 s
Accuracy in setting (mechanical): ± 10 %
Temperature coecient: 0.05%/°C,at=20°C
Output: 1×SPDT
Current rating: 10A/AC1
Switching voltage: 250VAC/24VDC
Min.breaking capacity DC: 500mW
Output indication: red LED
Mechanical life: 1×10^7
Electrical life(AC1): 1×10^5
Reset time: max 200ms
Operating temperature: -20°C to +55°C
Storage temperature: -35°C to +75°C
Mounting/DIN rail: Din rail EN/IEC 60715
Protection degree: IP40 for front panel/IP20 terminals
Operating position: any
Overvoltage cathegory: III.
Pollution degree: 2
Max cable size, mm2: solid wire max.1×2.5 or 2×1.5/with sleeve max.1×2.5
Dimensions: 90×18×64mm
Weight: 81g
Standards: EN 62055-1

Write your review

GRL8-02 level controller 10A, AC / DC24V-240V DIN rail for conductive liquids

GRL8-02 level controller 10A, AC / DC24V-240V DIN rail for conductive liquids

Application: Level monitoring in wells, pools, tanks, Advantages: control on 1 or 2 levels, FILLING or DRAINING functions, input sensitivity adjustment (5 ... 100KOhm), output response (adjustable 0.1 - 10s ), galvanically divided power supply: 24-240VAC / DC, output: 1SPDT 10A / AC1, relay status indication, DIN rail mounting.

Write your review