Submersible 40mm conductive probe with 2.5m conductor for conductive liquids

For electronic regulators for conductive fluid level. Conductive fluid, for registration by most modern regulators, is one that will shorten the electrodes with a resistance of up to about 50kΩ
Structurally, it is a stainless (S304) electrode pressed into a PVC capsule to prevent accidental contact with the body or other electrodes. The capsule has a compressed and bonded insulated conductor.

More details

CP40pvc2.5m

3 Items in stock

8,40 лв

Working principle:
One electrode is lowered into the lowest part of the tank and serves as the base electrode.
The remaining 1, 2, 3 or more electrodes are lowered to the corresponding fluid levels that we need to register. When any electrode gets wet, an electrical connection is obtained and the electronic regulators, tell-tales and other automatics respond through a suitable output signal. For the base electrode, the housing of each metal tank also does a great job.
Application: Contril of filling, drainage, signaling, protection, water supply, sewage treatment plants, wells, aquariums, and many other objects …
 
Specification:
Conductor Material: SUS304, Stainless Steel;
Insulation Material: PVC;
Size of the capsule: Ф13x40mm
Conductor cross-section: 0.25mm2
Conductor Length: 2.5 meters
The conductor can be further extended by making a reliable electrical connection and isolating it well.
Wire insulation, color: white
Temperature resistance: 105 ℃
Insulation voltage: 250V-380V
Maximum current: 10A

 

  • material Plastic and metal
  • Rated current: 10A
  • Rated voltage: 380 VAC
  • Operating temperature -20...105℃
  • Type of protective head: Version with cable
  • Diameter sensor: Ф13mm
  • Length of the sensor: 2.5m

Write your review

Submersible 40mm conductive probe with 2.5m conductor for conductive liquids

Submersible 40mm conductive probe with 2.5m conductor for conductive liquids

For electronic regulators for conductive fluid level. Conductive fluid, for registration by most modern regulators, is one that will shorten the electrodes with a resistance of up to about 50kΩ
Structurally, it is a stainless (S304) electrode pressed into a PVC capsule to prevent accidental contact with the body or other electrodes. The capsule has a compressed and bonded insulated conductor.

Write your review