Home > Automation>Measurement and Control>Thermo sensors>Thermocouples >K type dia 0.2 mm fine wire thermocouple probe 1m PTFE 260°C Class 1

K type dia 0.2 mm fine wire thermocouple probe 1m PTFE 260°C Class 1

The probes are used wherever necessary short response time and very good accuracy. An example is their application in the saturation of printed circuit boards. The tip of the probe allows touch also miniature electronic elements.  We offer standard performances with different cable length.

More details

K0.2PTFE1m260oC

33 Items in stock

22,80 лв

30 Other products in the same category

Conductors: Stranded thermocouple extension wire
Conductor Size: AWG 32
No. of Strands & Gauge: 1/0.2mm
Insulation: Extruded PTFE ( 260 oC)
Nominal Insulation Thickness: 0.15mm
Color code: IEC 584-3
Positive Chromel (Ni-Cr) Green
Negative Alumel (Ni-AL) White
Assembly: Two conductors(positive & negative) parallel construction
Overall Jacket: Extruded PTFE ( 260 oC)
Nominal Sheath Thickness: 0.28mm
Dimensions / tolerances (mm):
1.05 +/-0.25 x 1.58 +/-0.25
Cable length: 1m
Calibration toleranse: 1.1 oC  or 0.4%
Temperature range: -200 … 260 oC

 

  • Type temperature sensor Thermocouple K
  • Operating temperature -50 ÷200 °C
  • Length of the sensor: 1000 mm

Write your review

K type dia 0.2 mm fine wire thermocouple probe 1m PTFE 260°C Class 1

K type dia 0.2 mm fine wire thermocouple probe 1m PTFE 260°C Class 1

The probes are used wherever necessary short response time and very good accuracy. An example is their application in the saturation of printed circuit boards. The tip of the probe allows touch also miniature electronic elements.  We offer standard performances with different cable length.

Write your review