Thermowell Ф8x150 mm + Metal Cable Gland MPG9

As an additional accessory, a very practical solution is to assemble a thermowell with brass and nickel-plated cable glands, in this case it is an MPG9 nipple. 

More details

TW8x150NPT1/2+MPG9

2 Items in stock

20,40 лв

14 Other products in the same category

Thermowell is a one-sided closed pipe fitting. Used to protect temperature sensors installed in industrial processes. A temperature sensor, such as a thermometer, a thermocouple, or a thermal resistor, is needed at the open end of the tube to protect against mechanical stress and / or to seal the object. Keep in mind that thermowell introduces additional inertia and measurement errors due to thermal conductivity of the thermowell as an inevitable physical process.
Several types of thermowells in this section, with standard lengths of 50 to 250 mm, are not recommended for use under extreme operating conditions, for example at temperatures above 600 ° C and / or pressures above 10 bar.Several types of thermoblocks in this section, with standard lengths of 50 to 250 mm, are not recommended for use under extreme operating conditions, for example at temperatures above 600 ° C and / or pressures above 10 bar.
As an additional accessory, a very practical solution is to assemble a thermowell with brass and nickel-plated cable glands, in this case it is an MPG9 nipple. This also results in a cable fixation and sealing of sensor a and the kit acquires a finished form. Keep in mind that there are rubber and PVC clamping sleeves in the nozzle, therefore, the temperature should not exceed 100 ° C. If this is inevitable, these bushings are recommended to remove and the space freed, can be filled with high temperature silicone.
L=150 mm

  • material stainless steel, brass, PVC, rubber
  • Diameter sensor: ф8 mm
  • Length of the sensor: 150 mm

Write your review

Thermowell Ф8x150 mm + Metal Cable Gland MPG9

Thermowell Ф8x150 mm + Metal Cable Gland MPG9

As an additional accessory, a very practical solution is to assemble a thermowell with brass and nickel-plated cable glands, in this case it is an MPG9 nipple. 

Write your review